Products

Turner ECS is a Woodward Recognized Turbine Retrofit Partner. Turners ECS offers Woodward simplex, duplex or TMR control system for Gas Turbine applications. The software applications for the Gas Turbine controls are created and tested by Turner ECS qualified engineers. Turner ECS has a cabinet assembly line where new cabinets can be assembled and tested according to customer specs.

ATLAS II GT

The Atlas-II programmable control is designed specifically for prime mover control applications such as: 

  • Gas Turbines & Steam Turbines 
  • Compressor Control and Protection 
  • Gas and Diesel Engines 
  • Hydro Turbines
Read more...

The ATLAS II is a low cost alternative to a general purpose PLC as it has the option to incorporate the following functions:

  • Speed control
  • Synchronisation
  • Load sharing
  • Generator protection
  • Prime mover sequencing
  • Import/export control

The Atlas-II control is available in several configurations to meet the specific I/O needs of the prime  mover. The modular hardware configuration of the Atlas-II lends itself to bulkhead mounting.

Hardware modules can support a variety of analog and digital signals including thermocouples, RTDs, 4–20 mA signals, and others. Control power for the Atlas-II is supplied from an external 24 Vdc source.

Environmental specifications allow the Atlas-II control to move out of the control room and closer to the prime mover. In many cases, it can be mounted on the prime mover skid. Typically, the Atlas-II control is mounted in an enclosure rated for the site-specific environmental conditions.

The Atlas-II platform supports Profibus and Ethernet field architectures for remote distributed I/O.

Micronet Plus GT

The MicroNet™ Plus control system is a flexible, SIL 3 certified, state-of-the-art digital control system designed specifically for prime mover control applications such as:

  • Gas Turbine Control
  • Compressor Control
  • Steam Turbine Control
  • Hydro Turbine

MicroNet Plus features, including redundant or simplex CPUs, modular I/O, flexible software environment, and highly accurate time synchronization make it ideal for its target markets:

  • Power Generation
  • Process Industries
  • Oil and Gas Exploration
  • Marine Transportation Control
Read more...

MicroNet Plus control system flexibility and modularity adapt from simple applications with limited I/O to the most complex applications and processes with extensive I/O. I/O modules and application software provide the control engineer with the flexibility to control or monitor every parameter and process of typical applications, including:

  • Speed and Load Control
  • Temperature and Process Control
  • Combustion Control
  • Anti-Surge Control
  • System Sequencing and Package
  • Auxiliary Control
  • Alarm + Shutdown annunciation

MicroNet Plus features and performance are specifically designed for the rigorous requirements of prime mover control. CPU capability, application software recursion rates and determinism, software algorithms, I/O signal conditioning and filtering, and numerous other features combine with long-term support and Woodward service to ensure a smooth start-up and long support life. These features create the ideal product when performance matters:

  • Rigorous load rejection performance;
  • Complex DLE fuel control algorithms;
  • Incipient Surge Detection;
  • Long-term naval programs
Micronet TMR GT
The MicroNet TMR’s superior architecture and diagnostic coverage combine to create a system with 99.999% availability and reliability.m The MicroNet TMR can be applied as a component of protection and safety systems to allow the overall system to meet IEC61508 SIL-3 compliance standards.
Read more...

Typical MicroNet TMR application experience and use:

  • Refrigeration Compressors (Ethylene, Propylene)
  • Methane and Syn Gas Compressors
  • Gas Cracker Compressors
  • Charge Gas Compressors
  • Hydrogen Recycle Compressors
  • Critical Turbine Generator Sets
  • Turbine Safety Systems

For IEC61508 SIL-3 based applications, a safety certified MicroNet Safety Module (MSM) is required as part of the MicroNet system. The MSM functions as the system’s SIL-3 logic solver, and its fast (12 millisecond) response time and integrated overspeed and acceleration detection/protection functionality make it ideal for applications on critical high-speed rotating motors, compressor, turbines, or engines.

Designed as a turbine control system, the MicroNet TMR controller’s actuator driver modules are designed to interface with proportional or integrating turbine valve servos using single or dual redundant coils, with AC or DC feedback position sensors. The MicroNet TMR control can accommodate any combination of Woodward standard MicroNet I/O modules to provide maximum application flexibility. Available Inputs and Outputs include:

  • Magnetic pickups (MPUs) and proximity probes
  • Discrete I/O
  • Analog I/O
  • Thermocouple inputs
  • Resistance temperature devices (RTDs)
  • Proportional and integrating actuator drivers (integrated AC and DC position inputs)
  • Ethernet and Serial communications
A Turner Group Company
Copyright Turner ECS
Contact us
Turner ECS Netherlands

Dirk Storklaan 76
2132 PX Hoofddorp
The Netherlands
Tel: +31 (0) 23 566 23 00
Fax: +31 (0) 23 564 27 27
Email: Info.NL@turner-ecs.com

 

Turner ECS United Kingdom
Newstead Trading Estate
Trentham
Stoke on Trent ST4 8HT
United Kingdom
Tel: +44 (0) 1782 657 331
Fax: +44 (0) 1782 644 600
Email: Info.UK@turner-ecs.com
Turner ECS Middle East
Bin Hamoodah Building
7th Floor, Sh. Khalifa Street
P.O. Box 203, Abu Dhabi
United Arabic Emirates
Tel: +971 02 626 7912
Fax: +971 02 626 9239
E-mail: info.ME@turner-ecs.com
Turner MCS Italy
Polo Tecnologico della Brianza Edif. 9 Lab 3
Via Lavoratori Autobianchi 1
20832 Desio
Italy
Tel: +39 0362 62 12 40
E-mail: Info.IT@turner-mcs.com
Turner ECS Norway

Varhaugs Maritime Diesel AS
Stavangerveien 28
4313 Sandnes
Norway
Tel: +47 51 60 55 50
E-mail: Info.NO@turner-ecs.com

Turner ECS GmbH

OhmStraße 2
D63225 Langen
Germany
Tel.: +49 (0) 6103 73 299 0
Fax: +49 (0) 6103 73 299 60
E-mail: Info.DE@turner-ecs.com