Products

Turner ECS utilises Woodward steam turbine actuation platforms designed for low-pressure or high-pressure servo systems and redundancy for high reliability.

Steam turbine OEMs have long used Woodward steam turbine valve based actuators on their turbine packages due to their high accuracy, fast response times, and long term reliability. Platforms range from self-contained pump/servo systems, to electric actuation, to servo position controllers. These platforms are specifically designed for steam turbine applications and provide proven reliable operation.

As a system supplier of actuators, turbine controls, compressor controls, safety systems, sensors and governors, Turner provides expert technical support through our knowledge of the complete system and all component interactions. 



CPC II
CPC II

The CPC-II (current to pressure converter, generation II) is an electrohydraulic pressure-regulating valve control designed for use in positioning single-acting steam turbine valve servos.

Key features:
  • Oil contamination resistant 
  • Redundant inputs/sensors for critical applications 
  • Self cleaning valve algorithm
  • Compliant with CE Directives, ATEX, Marine Listing and Ghost-R certified
Read more...

The CPC’s redundancy features make it ideal for critical steam turbine applications, where turbine up-time and availability are essential. This converter can be configured to accept redundant pressure demand inputs, from one or two (redundant) controllers, and vote the input to follow. Alternatively the CPC can be configured to accept signals from both its internal oil pressure sensor and an external (redundant) oil pressure sensor, and use the voted healthy signal. 

The CPC’s robust design (strong actuator, corrosion-resistant material, single moving rotary valve, and self-cleaning port design) makes it ideal for challenging applications where dirty or contaminated oil may be present.

Varistroke I
Varistroke I

The VariStroke-I is a linear electro-hydraulic actuator that is designed to provide the linear actuation force to operate steam turbine control valves or valve racks.

Key features are:
  • Dirt-tolerant design
    • Two moving parts
    • 50 lb chip shear force
    • Self-cleaning valve design
  • Side-load tolerant
    • Shaft bearings
    • Triple seal technology
  • Certified for Hazardous Location
  • Fast slew rates/times
Read more...

The VariStroke-I’s superb accuracy and resolution make it ideal for steam turbine valve control and related turbine speed and load control. The VariStroke-I electronics module accepts one or two (redundant) 4–20 mA position demand signals to position steam control valves. Precise and stable steam valve control directly relates to improved steam turbine speed and load control and reduced system mechanical wear. The actuator’s fast slew rates allows applied generator or compressor drive turbines to quickly respond to loss-of-load or emergency shutdown events.

The VariStroke-I actuator’s robust design (corrosion resistant materials, single moving rotary valve, 50 lb chip shear force, and self-cleaning port design) make it ideal for challenging applications where dirty or contaminated oil may be present.

PGPL Actuator/driver
PGPL Actuator/driver

The PGPL Actuator/Driver is an electrohydraulic actuator with a proportional driver interface which can be used with electronic controls providing a 0 to 200 mA position signal.

Key features:
  • Works with all 0–200mA output electronic controls
  • Integral magnetic pickup available
  • Rotary or linear output
  • TG Actuator
    TG Actuator

    The TG-13E and 17E actuators are self-contained electrohydraulic actuators for use on steam turbines where isochronous control, load sharing, or other functions are required.

    Key features are:
    • Proportional electric mechanical transducer 
    • 12.2 and 17.5 lb-ft (16.5 and 23.7 Nm) work capacity 
    • Self-contained oil sump
    TM25 - TM200 Actuator
    TM25 - TM200 Actuator

    The TM-25LP and TM-200LP actuators are electric-hydraulic, proportional actuators for positioning steam and fuel-control valves requiring low/high force linear inputs.

    Key features:
    • ATEX certified
    • Corrosion resistant construction
    • Optional dual-coil torque motor for redundancy
    PG-PL Governor
    PG-PL Governor

    The PG-PL Governor is widely used for controlling speed for all types of diesel or gas engines and steam turbines, driving pumps and compressors.

    Key features:
    • Isochronous control
    • Pneumatic or manual speed setting 
    • 16 to 79 J (12 to 58 ft-lb) output capacities
    Hydraulic Amplifier
    Hydraulic Amplifier

    The electrically controlled hydraulic amplifier is a pilot operated linear servo actuator. The amplifier is capable of operating the control mechanisms for steam turbines or large engines which require relatively large forces and work capacity.

    Key features:
    • ATEX certified
    • High work output
    • Rapid response
    • Independent starting system
    Electro Hydraulic Power Servo
    Electro Hydraulic Power Servo

    The Electrohydraulic Power Servo (EHPS) is a fully integrated threestage servo valve designed to drive low-pressure steam turbine control valve cylinders.

    This servo is ideal for retrofits where it is desired to upgrade the turbine control and hydraulic system but keep the expensive steam valve power cylinder. In retrofit applications the EHPS can directly replace the existing steam valve power cylinder operating system.

    A Turner Group Company
    Copyright Turner ECS
    Contact us
    Turner ECS Netherlands

    Dirk Storklaan 76
    2132 PX Hoofddorp
    The Netherlands
    Tel: +31 (0) 23 566 23 00
    Fax: +31 (0) 23 564 27 27
    Email: Info.NL@turner-ecs.com

     

    Turner ECS United Kingdom
    Newstead Trading Estate
    Trentham
    Stoke on Trent ST4 8HT
    United Kingdom
    Tel: +44 (0) 1782 657 331
    Fax: +44 (0) 1782 644 600
    Email: Info.UK@turner-ecs.com
    Turner ECS Middle East
    Bin Hamoodah Building
    7th Floor, Sh. Khalifa Street
    P.O. Box 203, Abu Dhabi
    United Arabic Emirates
    Tel: +971 02 626 7912
    Fax: +971 02 626 9239
    E-mail: info.ME@turner-ecs.com
    Turner MCS Italy
    Polo Tecnologico della Brianza Edif. 9 Lab 3
    Via Lavoratori Autobianchi 1
    20832 Desio
    Italy
    Tel: +39 0362 62 12 40
    E-mail: Info.IT@turner-mcs.com
    Turner ECS Norway

    Varhaugs Maritime Diesel AS
    Stavangerveien 28
    4313 Sandnes
    Norway
    Tel: +47 51 60 55 50
    E-mail: Info.NO@turner-ecs.com

    Turner ECS GmbH

    OhmStraße 2
    D63225 Langen
    Germany
    Tel.: +49 (0) 6103 73 299 0
    Fax: +49 (0) 6103 73 299 60
    E-mail: Info.DE@turner-ecs.com